Forged, hand-finished and passivated in our own facility — supplied to importers, distributors and OEM brands in more than 45 countries with full lot traceability.
Six manufacturing lines, one quality system. Every catalogue below is produced in-house — from forging and CNC machining to hand assembly, ultrasonic cleaning and passivation.
Scissors, forceps and self-retaining retractors in AISI 420 / 304 stainless steel with matte or mirror finish.
View RangeBipolar forceps, reusable silicone cables and electrodes built for stable insulation across repeated autoclave cycles.
View RangeAspiration, infiltration and fat-transfer cannulas with Luer-Lock, Toomey and threaded hub options.
View RangeBone cutters, rongeurs, reduction forceps, amputation saws, drill guides and complete fragment sets.
View RangePerforated 304/316 trays, silicone mats and lid systems designed for validated steam sterilization loads.
View RangeSingle-use procedure packs and drape kits assembled to your component list and sterilization method.
View RangeBayonet, straight and angled tips from 0.3 mm to 2.0 mm, in stainless steel or non-stick titanium.
View RangeTrauma, small fragment and pelvic reconstruction sets supplied tray-mounted and laser-numbered.
View RangeThe references below are repeat-ordered most often by our distributor partners in the EU, North America and the Gulf region. Full dimensional drawings and material certificates are available on request.
Autoclavable silicone jacket, 3 m standard length, tinned copper core; 132 °C steam cycles validated.
AISI 420 hardened blades, one micro-serrated edge for slip-free soft-tissue cutting, satin finish.
Complete tray-mounted set with reduction forceps, benders, drill guides and depth gauge; laser-numbered positions.
Compatible with Martin generator sockets; strain-relief moulding tested to 5,000 flex cycles.
Abdominal and gynaecological pattern with balanced ring handles; blade hardness 50–54 HRC.
Double-action leverage for reduced hand fatigue; hardened jaw tips for clean cortical bites.
European flat-pin configuration for Erbe units; colour-coded jacket options for OEM programmes.
1.0 mm tip standard, fully insulated shanks, available in stainless steel or non-stick titanium.
We have shipped surgical instruments from Sialkot since 2005. What our partners value most is not only the steel — it is the predictability of documentation, packaging and delivery.
Every batch is linked to a mill certificate for the steel heat lot. Hardness (HRC), corrosion and finish checks are recorded per lot and released with your shipment.
Fiber laser branding, catalogue numbering, custom patterns from your drawing or sample, and retail-ready packaging — all produced under one roof, not brokered out.
Commercial invoice, packing list, certificate of origin, declaration of conformity and lot lists prepared to your customs broker's format — FOB, CIF or DDP.
You buy from the workshop, not a trading desk. Tiered pricing by reference volume, with tooling amortised transparently on bespoke projects.
ISO 13485:2016 QMS with documented CAPA, incoming inspection and final AQL sampling. Third-party and customer audits are welcome at our Sialkot facility.
A named export executive plus a production engineer handle your account, so specification questions are answered by the people who actually make the instrument.
From a single pattern modification to a full private-label catalogue, our OEM programme is designed for distributors who need their own identity on a clinically reliable instrument.
A transparent five-stage route that keeps your launch calendar realistic.
Sialkot's instrument industry is more than a century old. Our value is combining that hand-finishing tradition with measurable, repeatable process control.
Closed-die forging in martensitic stainless steel, followed by CNC milling of joints and box locks so that jaw alignment stays inside 0.05 mm tolerance.
Vacuum hardening and tempering to pattern-specific hardness — typically 48–54 HRC for cutting edges — verified by Rockwell testing on every batch.
Master craftsmen set tension, ratchet engagement and tip closure by hand; a step that machine-only production still cannot replicate for fine instruments.
Ultrasonic cleaning followed by nitric or citric acid passivation to rebuild the chromium oxide layer and resist pitting during repeated autoclaving.
Functional test, magnification surface check, laser marking of REF and LOT, then final AQL sampling against the agreed acceptance plan.
Corrosion-protected individual packing, carton labelling to your SKU scheme, and a release file containing certificates and lot traceability.
Regular shipments to hospital suppliers, dental and veterinary distributors, plastic surgery clinics and OEM brand owners across five continents.
The five questions our export desk receives most often from first-time importers of surgical instruments.
Standard catalogue references start at 50 pieces per item. Fully bespoke instruments that require new forging dies or tooling are usually quoted from 100–250 pieces per reference, so that tooling cost per unit remains commercially viable for your market.
Cutting and holding instruments are produced in German-standard martensitic stainless steels (AISI 410, 420, 420B). Retractors, trays and non-cutting parts use austenitic AISI 304 or 316L. Titanium Grade 5 is available for micro instruments and non-stick bipolar forceps. Mill certificates for each heat lot are supplied on request.
Yes. Our facility operates an ISO 13485:2016 certified quality management system, reusable instrument families are CE marked under the applicable EU regulation, and our establishment holds US FDA registration. Technical files, declarations of conformity and traceability records are shared with appointed distributors under NDA.
Repeat catalogue orders generally ship in 15–25 working days. A first OEM run with laser branding and custom packaging takes 30–45 working days after sample approval. We quote FOB Karachi, CIF and DDP, and ship by air courier, air freight or sea freight with complete export documentation.
Absolutely. Customer audits at our Defence Road facility in Sialkot are welcome by appointment, and we routinely host third-party pre-shipment inspections (SGS, Bureau Veritas, TÜV or your own agent) against an agreed AQL plan and specification sheet.
Practical guides written by our production and export team — sourcing criteria, material science and compliance essentials.
Why more than 2,000 workshops cluster in one Pakistani city, how the supply chain is structured, and the questions to ask before you place a first order.
Read Article
Bone cutters, rongeurs, reduction forceps, saws and drill guides compared — pattern selection, hardness requirements and set configuration advice.
Read Article
Bipolar forceps tip sizing, cable connector standards by generator brand, insulation testing and how to avoid the most common reorder mistakes.
Read ArticleSend us your specification, drawing or competitor reference. Our engineering team replies with material options, MOQ and lead time — usually within one business day.